Char-Lynn Eaton 101-1090-009

  • $250.00
    Unit price per 


Char-Lynn Eaton 101-1090-009 Hydraulic Gerotor Spool Valve Motor - H-Series, 4.50 in³/r, 2-Bolt Flange - 3.25 in Pilot

Specifications


series:

H-Series

  intermittent pressure:

2400 psi

displacement:

4.50 in³/r

  intermittent torque:

1401 in-lbs

maximum rpm-continuous:

760 rpm

  replacement buna seal kit - sold separately:

007 Design - 60023-000, 008 & 009 Design - 60540-000

continuous torque:

1044 in-lbs

  replacement viton seal kit - sold separately:

007 Design - 60032-000, 008 & 009 Design - 60544-000

continuous pressure:

1800 psi

  replacement bearing race - sold separately:

007, 008 & 009 Design - 7462-000

continuous flow rate:

15 gpm

  replacement needle thrust bearing:

007, 008 & 009 Design - 7537-000

motor port type:

Manifold (5/16-18 UNC Bolt Threads)

  replacement output shaft - sold separately:

007, 008 & 009 Design - 7360-002

motor port size:

Manifold

  replacement gerotor - sold seprately:

009 Design - 8277-024

shaft type:

Splined

  replacement drive - sold separately:

009 Design - 22250-000

output shaft size:

1 in SAE - 6B Spline

  replacement short cap screw (mounting end) - sold separately:

007, 008 & 009 Design - 16292-088 - 4 Required

mounting type:

2-Bolt Flange - 3.25 in Pilot

  replacement long cap screw (cap end) - sold seprately:

009 Design - 16294-162 - 7 Required

seal type:

Standard

  replacement rear housing - sold separately:

009 Design - 22230-003, 008 & 007 Design - 7359-003

case drain:

No Case Drain

  replacement mounting flange - sold separately:

009 & 008 Design 22000-001, 007 Design 7463-000

inlet and outlet port size:

Manifold Ports 5/16-18 UNC Thread

  weight:

11.5 lbs

actual port type:

Manifold (.3125-18 Unc Thd.)

  recommended fluids: Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature,
actual output shaft:

25.4 [1.00] Sae 6B Spline With 1/4-20 Threaded Hole

  recommended filtration:

Per Iso Cleanliness Code. Level 18/13

actual mounting flange:

2 Bolt Std: 82.6 [3.25] Dia. X 3.0 [.12] Pilot, 13.59 [.535] Dia. Mounting

  repair manual#:

7-117

maximum operating temperature:

180 °F

  repair parts drawing#:

6-121

overall height:

133.9 mm

  manufacturer product page: Click here
overall length:

142.3 mm

  manufacturer catalog: Click here
overall width:

98.3 mm

  parts and repair manual: Click here
intermittent flow rate:

18 gpm

  product brochure: Click here